DC Stepper Motor 28BYJ-48withULN2003APG Driver BoardFeatures:The rotation angle of the motor is proportional to the input pulse.The motor has full torque at standstill (if the windings are energized)Precise positioning and repeatability of movement since good stepper motors have an accuracy of5% of a step and this error is non cumulative from one step to the next.Excellent response to starting / stopping / reversing.Very reliable since there are no contact brushes in the motor. Therefore the life of the motor is simply dependant on the life of the bearing.The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the shaft.A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.See image two for aschematics showing how to interface the stepper motor to an ArduinoStepper Motor 28BYJ-48 Parameters:Model: 28BYJ-48Rated voltage: 5 Volt DCNumber of Phase: 4Speed Variation Ratio: 1/64