240 Watt – 6-30 Volt DC Motor Reversing Control – Continuous ModeAdditional Notes:* DC Motor Reversing Control board in a DIN Rail mount Case.* Mode: Normal – Motor starts and runs Continous whenever K1 or K2 Pushbutton switch signal is applied (Forward or Reverse).* SW1 orSW2 Will Stop Respective Forward/Reverse (Useful Input For Limit Switches).* Opposite Direction Input Will Change The Direction of Rotation After ~0.3 Seconds* Voltage: 6-30 Volt DC (12-24 Volt Recommened)* Output Voltage is Same as Input* Current: 20 Amps Max (Surge)* Power: 240 Watt Max (20 Amp @ 12 Volt DC/10 Amp @ 24 Volt DC)* Control Signals: Low level Input Signal (0V or GND)* Operating Temperature: -40 To 80C* Humidity: 10%~90% Relative Humidity* Dimensions (LxWxH): 92mm x 54mm x 60mm(3-5/8″ x 2-1/8″ x 2-3/8″) MPJA37940 MD