Assorted Lot of Mil-Spec HardwareCondition:* New Surplus Stock, No OEM Packaging. As Pictured.Additional Notes:Some of The Hardware Included:Camloc 26S8-3 1/4 Turn Stud * Diameter: 0.303″ Nominal* Turnlock Stud Head Style: Flat fillister* Stud Assembly Style: Stud assembly* Distance From Engaging Member To Largest Bearing Surface Of Head: 0.602″ Minimum and 0.617″ Maximum* Eyelet Outside Diameter: 0.244″ Minimum and 0.250″ Maximum* Eyelet Length: 0.322″ Nominal* Material Accommodated Thickness: 0.060″ Minimum and 0.119″ Maximum* Drive Type: Cross Recess* Stud Head Height: 0.093″ Nominal* Material: Steel Overall* Surface Treatment: Cadmium OverallMS21049L3 10-32 Nut Plate* Surface Treatment: Cadmium* Surface Treatment Specification: Qq-p-416 federal specification single treatment response* Plate Thickness: 0.047″* Plate Width: Between 0.406 inches and 0.453″* Nut Style: Plate* Nut Mounting Provision: Straight holes* Nut Length: 0.948″* Nut Height: 0.281″* Mounting Hole Diameter: Between 0.098″ and 0.103″* Mounting Hole Arrangement Style: 2 Holes* Material: SteelCamloc 40S5-15 1/4 Turn Stud * Stud Assembly Style: Stud Assembly* Material Accommodated Thickness: Between 0.471″ and 0.500″* Material: Steel* Eyelet Outside Diameter: Between 0.341″ and 0.348″* Drive Type: Cross Recess* Diameter: Between 0.377″ and 0.384″* Surface Treatment: Cadmium and Chromate* Turnlock Stud Head Style: Flat CountersunkCamloc 2600-3SW Winged 1/4 Turn Stud* Surface Treatment: Passivate* Stud Shank Major Diameter: 0.128″* Stud Head Height: 0.440″* Material Accommodated Thickness: Between 0.045″ and 0.055″* Material: Steel* Head Length: 0.720″* Grip Length: 0.600″* Turnlock Stud Head Style: Fillister Wing* Turnlock Stud Shank Style: Stud Shankand many more…UNKRP23685